Table of Contents
Can you stand in the direct sun heat for an hour? No, it is very, very hard until you have an umbrella. So, how can you expect the walls to bear sun heat and underwent no damage? There is a critical need to install external shades, so to protect the walls from direct sun heat damage. This blog discusses how to protect walls from direct sun heat.
You may have witnessed sun shades installed on buildings to enhance building design and to protect walls as well. By using this strategy, the temperature can also be regulated inside the building. Heat transfer will be limited, and hence temperature stays low. Moreover, it is an energy-efficient approach and cut down costs of AC.
Protecting walls from direct sun heat
Although it will cost money upfront to protect your new house from the sun, you could end up saving hundreds of dollars in energy expenditures over time. It’s not necessary to shade every surface of the structure from sunlight as exterior walls and roofs are typically insulated against heat and cold; rather, your east and west-facing windows should be covered. An eco-friendly strategy to reduce your summer cooling costs is to restrict solar energy from entering via your windows. Let’s explore how to protect walls from direct sun heat.
Try blinds, louvers, and silhouette shades!
Improve external shading quality and quantity to offer maximum protection against heat. You can install these on windows and can work on sloped roofs as well. Don’t think that insulating the wall will be enough as heat and light also enter the house through windows. So, take steps accordingly.
Install the overhangs along modern building facades!
You should know that there are some modern versions as well. Trying modern building facades will add more to your heat issues as they are mostly glass products. Hence, there is a need to install overhangs above the ground levels and Floor 1. It will restrict direct sunlight to enter the building and hence it remains cooler all day.
Recessed Windows
These recessed windows have continuous projections built around them and a wood exterior, making them a standout feature of the building’s front. Moreover, your building exterior looks neat with recessed windows and helps lower the internal temperature of the house.
The window screens like louvers that can be adjusted and are made of materials including glass, aluminum, and wood. They provide shade from the sun and allow adequate airflow inside. Louvers have the disadvantage of being difficult to maintain because they collect dust and need to be cleaned frequently.
Keep reading to learn how to protect walls from direct sun heat.
Shades by tress – the perfect idea
Trees in the residency not only offer shade but also support cooling through transpiration. To regulate the surrounding temperature, the leaves constantly release water vapors into the air.
Evergreen trees offer summertime shade and shed their leaves in the fall season to make way for the winter sun through their bare limbs. The roof and several outside architectural features can be effectively shaded all year long by evergreen trees with large canopies. Similar to this, windows are shaded by shrubs and bushes grown near the house.
Let’s get fair! There is nothing good than protecting walls with flora from sunlight. If you are a nature lover and adore greenery, then try it right away. You may attach a frame to the outer walls that directly face the sun, specifically south-facing walls. A climbing vine at the base of the trellis will work best.
When the vine will grow and climb up the wall, more and more sunlight is blocked to enter the house or a building. It is suggested to not block the south-facing windows, as they don’t face sunlight directly on summer days to make up for the light loss during winters.
Take Away!
Heat absorbing material for the room may absorb and reflect heat but you still need to block heat from entering the house. If you need any guidance on how to protect walls from direct sun heat.
